close
Buxout

General Blog

Buxout
Home Improvement

Ways To Clean The Bathtub Of Different Models

MINIMUM USAGE FEE £35. Please call Rex Features on 020 7278 7294 with any queries. Mandatory Credit: Photo by Image Source/REX/Shutterstock (806997a) MODEL RELEASED, Person Cleaning Bath VARIOUS

The bathtub is an item considered chic and, for some, a dream of consumption, as it is excellent for relaxing. However, before having one at home or having such service at home, you need to know how to clean the bathtub. Proper hygiene is necessary to avoid bacteria and germs, as well as fat stains.

To clean the bathtub, it is essential to identify which material it is made of. That way, you can perform more effective cleaning. The most common types of bathtubs are porcelain, acrylic, and enamel. Each of these models has a different characteristic and, therefore, requires specific care.

Porcelain

This type of bathtub is highly resistant. In this case, the idea is to pour a little liquid cleaner into a moistened synthetic fiber sponge and apply the product to the surface of the bathtub. Then rinse the area thoroughly with warm water and dry the bathtub.

Acrylic

Acrylic is very similar to plastic, at the risk of being deformed or scratched. Therefore, avoid the use of abrasive cleaning materials such as pumice or steel sponges during cleaning. The washing of this type of bathtub can be the same as that of porcelain.

Enamel

Enameled bathtubs are rarer to find and, therefore, require more care. Products with bleach or caustic soda should not be used in this material, as they can cause rust or permanent stains. You can use a mixture of hot water and liquid detergent or a degreaser for cleaning. Use the smooth side of the sponge or a soft cloth and gently wipe the surface. After rinsing, dry the bath to prevent the formation of limescale.

Fiberglass

These models must be cleaned with a specific product or with a non-abrasive cleaner. The ideal is to apply the product with a damp sponge. After use, rinse the bath thoroughly with warm water and use a sponge to remove residues from the bath.

If there is dirt stuck to the bathtub’s metal accessories, the ideal is to clean them with a product that contains ammonia, for example. For more results, rub the surface with water and vinegar. Dry with a cloth and rub to shine and for repair, call on specialists like https://climatecontrolexperts.com/plumbing/ amongst other to do the work.

Whirlpool

Unlike the others, cleaning this accessory should be more cautious. So, check out the step by step to clean the hot tub:

  • Fill the bathtub with hot water until it covers all the jet outlets
  • Then place two tablespoons of mild detergent in the hot tub. That done, turn on the jets for about 15 minutes
  • When you are finished, empty the bathtub. Now, fill the bathtub only with cold water;
  • Repeat the process with the jets for 15 minutes. This system will remove any soap residue that may have been left inside the pipes
  • Empty the bathtub again. And it’s ready to use
admin

The author admin

Leave a Response